Default Setup; Original; Optimal - AOpen AP41 User Manual

AMI BIOS

Default Setup

Select this option to automatically set your system configuration
e
parameters. To select, highlight Default and press .

Original

This option loads the values that you saved before shutting off the
system. The following prompt appears if you select Original from the
Default Setup menu. Choose Yes to load the original values.

Optimal

Choose this option and the BIOS configures the system using the
best-case values to optimize system performance. However, these
values may not be applicable to your system. If your system does not
boot after choosing this setting, reconfigure it using the Fail-safe
settings. Refer to the following section.
The screen below appears if you choose Optimal from the Default
Setup menu. Select Yes to load the optimum values.
3-30 User's Guide