This chapter discusses the CPU options, tells how to set jumpers,
upgrade system memory, add expansion boards, and install the
system board.
Install the CPU, memory, and set the jumpers before you install the
board into a housing.
installing the board. Read this chapter to learn about the components
before you install them.
ESD Precautions
Electrostatic discharge (ESD) can damage your processor, disk
drives, expansion boards, and other components. Always observe
the following precautions before you install a system component.
1.
Do not remove a component from its protective packaging until
you are ready to install it.
2.
Wear a wrist grounding strap and attach it to a metal part of the
system before handling components.
available, maintain contact with a metal part of the system unit
throughout any procedure requiring ESD protection.
User's Guide
Hardware Setup
You may add the other components after
If a wrist strap is not
Chapter
2
2-1