AMI BIOS
Hard Disk Drives
Select Master Disk to configure the first hard disk. The following
values appear on the screen:
}
Press
to move to the next page. Use
selected parameter. If you cannot find your hard disk drive type on
User
the list, select
and enter the disk parameters. You can also
select Utility Setup.
This automatically configures your hard disk.
Refer to the section Utility Setup for more information.
ESDI
SCSI
Select
or
If you have two hard disks installed, select Slave Disk and follow the
same procedure to configure the second hard disk.
3-4
w
depending the device installed.
y
or
to highlight the
User's Guide