AMI BIOS
IRQ Active
This option specifies if the parallel and serial port IRQs are active high
or active low. The default setting is
High
.
Parallel Port Mode
This option lets you set the parallel port mode. The settings are
Normal, SPP, EPP & SPP, ECP and ECP & EPP. The default setting
Normal
is
.
Utility Setup
Detect Master and Detect Slave
These functions allow your system to automatically configure the hard
disk. This screen appears if you select Detect Master or Detect Slave
option.
After a few seconds, the screen below appears showing your disk
Yes
parameters. Select
to accept the values.
3-28
User's Guide