AMI BIOS
32-bit Transfer
Normally, this parameter is set to
Disabled
. Enabling this function
improves disk performance by increasing the data transfer rate from
16-bit to 32-bit.
Chipset Setup Mode
This function allows you to change the Chipset Setup DRAM and
SRAM parameters according to the end-user type. The available
settings are End-user and Engineer. We recommend that you set this
parameter to
End-user
. See the following section for more details
about the Chipset Features Setup.
Chipset Features Setup
The Chipset Features Setup controls the board's chipset settings.
The controls for this menu are the same as for the previous screen.
The Chipset Setup DRAM and SRAM parameters differ depending on
the Chipset Setup Mode setting in the Advanced CMOS Setup. The
following screens appear if you select the Chipset option from the
Setup menu and if the Chipset Setup Mode parameter setting is
End-
user
:
User's Guide
3-15