Wake-Up Events; Monitor Type; Display Off After; Hdd Off After - AOpen AP41 User Manual

Wake-up Events

Enabling these parameters allow your system to monitor the I/O
activities. Any activity detected resets the power-management timers
and resumes the system to normal mode.
You must enable at least one IRQ activity.
Otherwise, the system stays in suspend mode..

Monitor Type

This option lets you set the monitor type. The selections are Green
and Non-Green.

Display Off After

This parameter lets you set the display-off mode. The selections are
Doze, Suspend, Standby and Disabled. Once the system enters the
specified mode, the monitor screen turns blank. Monitors with green
function allows you to save more power since the system shuts down
the VH sync. once it enters the specified power-saving mode.

HDD Off After

This option lets you specify which mode to "spin down" your hard disk.
The disk returns to full speed once the system returns to normal
mode. The settings are Doze, Suspend, Standby and Disabled.
User's Guide
AMI BIOS
3-25