PCI IRQ Activated By
This option lets the user set when to activate the PCI IRQ. The
available settings are Edge and Level. The Edge is the start of the
signal and Level is the point at which the signal is high. The default
setting for this parameter is
PCI IDE IRQ Map To
This feature enables you to control the PCI IDE IRQ mapping. The
available options are ISA, PCI-Slot 1, PCI-Slot 2, PCI-Slot 3, PCI-Slot
4 and PCI-Auto. The default is
Onboard PCI SCSI Chip
This parameter lets you enable or disable the onboard PCI SCSI chip.
Enabled
The default setting is
Onboard PCI IDE Chip
This parameter lets you enable or disable the onboard PCI IDE chip.
The default setting is
Enabled
Onboard FDC Controller
If enabled, this parameter allows you to connect your floppy disk
drives to the onboard floppy disk connector instead of a separate
controller card. Change the setting to
a separate controller card. The default setting is
User's Guide
Award BIOS
Level
.
ISA.
.
.
Disabled
Enabled
if you want to use
.
3-19