Using Keylock; Using The Display Backlight - Uniden UBC69XLT-2 Owner's Manual

UB334 Paper OM reduced size.fm Page 34 Friday, September 9, 2005 11:16 AM
Follow these steps to select a different channel as
the priority channel.
1. Manually select the channel you want to select
as the priority channel.
2. Press Func + Pgm, then press Func + Pri.
P
appears to the left of the selected channel
number.
To turn on the priority feature, press Func + Pri
during scanning. PRI appears. Then the scanner
checks the designated priority channel every
2 seconds.
To turn off the priority feature, press Func + Pri.
PRI disappears.

Using Keylock

Use the scanner's keylock to protect it from
accidental program changes. When the scanner's
keys are locked, the only controls that operate are
Scan, Func, Hold,
To turn on keylock, press Func +
To turn off keylock, press Func +
disappears.
Note: Using keylock does not prevent the scanner
from scanning channels.

Using the Display Backlight

To turn on the display light for easy viewing at night,
press . The display lights for 15 seconds. To turn
off the light sooner, press
, , and .
.
.
again.
Special Features
34
appears.