I Connections - Icom IC-M502AW Instruction Manual

I Connections

q
w
q DC POWER CONNECTOR
Connects the supplied DC power cable from this connector
to an external 13.8 V DC power source.
w EXTERNAL MICROPHONE JACKS
Connects to optional HM-127
.
PHONE
CAUTION: NEVER
connect other microphones, such
as the HM-134, as this may cause damage to the transceiver.
e ANTENNA CONNECTOR
Connects a marine VHF antenna with a PL-259 connector.
CAUTION:
Transmitting without an antenna may dam-
age the transceiver.
t
r
e
REMOTE-CONTROL MICRO-
CONNECTIONS AND MAINTENANCE
r NMEA IN (Red)/NMEA OUT (White) JACKS
Connects to a GPS receiver for position and time indica-
tions.
• An NMEA0183 ver. 2.0 or 3.01 (sentence formatters RMC,
GGA, GNS, GLL) compatible GPS receiver is required. Ask your
dealer about suitable GPS receivers.
RCA
NMEA IN (+)
Connects to a PC or navigation equipment (NMEA0183
ver. 3.01 sentence formatters DSC, DSE compatible) for
plotting received other ships position data.
RCA
NMEA OUT (+)
t EXTERNAL SPEAKER JACK
➥Connects to an external speaker.
CAUTION:
After connecting the DC power cable, NMEA
IN/OUT jacks and external speaker jack cover the connec-
tor and jacks with a rubber vulcanising tape as shown
below, to prevent water seeping into the transceiver.
Rubber vulcanizing
tape
9
NMEA IN (–)
NMEA OUT (–)
9
43