Specifications And Options; I Specifications - Icom IC-M502AW Instruction Manual

12

SPECIFICATIONS AND OPTIONS

I Specifications
D D General
• Frequency coverage
Transmit
Receive
• Mode
• Channel spacing
• Current drain (at 13.8 V) : TX high
• Power supply requirement: 13.8 V DC ±15%
• Frequency stability
• Dimensions
(Projection not included)
• Weight (approx.)
All stated specifications are subject to change without
notice or obligation.
50
:
156.025–157.425 MHz
156.050–163.275 MHz
: FM (16K0G3E)
DSC (16K0G2B)
: 25 kHz
5.5 A max.
Max. audio 1.5 A max.
: ±10 ppm
(–20°C to +60°C; –4°F to +140°F)
: 165(W) × 110(H) × 109.4(D) mm
(W) × 4 (H) × 4
1 11 5
6 ⁄ ⁄ ⁄ (D) in
2 32 16
: 1130 g; 2 lb 8 oz
D D Transmitter
• Output power : 25 W / 1 W
• Modulation system : Variable reactance phase
• Max. frequency deviation : ±5.0 kHz
• Spurious emissions : –70 dBc
D D Receiver
• Receive system : Double conversion
• Sensitivity (12 dB SINAD) : 0.22 µV (typical)
• Squelch sensitivity : 0.22 µV (typical)
• Intermodulation rejection ratio: More than 75 dB
• Spurious response : More than 75 dB
rejection ratio
• Adjacent channel selectivity : More than 75 dB
• Audio output power : 4.5 W (typical) at 10% distortion
modulation
superheterodyne
with a 4 Ω load