Router Label; Positioning Your Wireless Router - NETGEAR DG834Gv3 Setup Manual

Router Label

The label on the back of the wireless ADSL2+ modem router shows the router's MAC address,
serial number, security PIN, and factory default login information.
Figure 4

Positioning Your Wireless Router

The wireless ADSL2+ modem router lets you access your network from virtually anywhere within
the operating range of your wireless network. However, the operating distance or range of your
wireless connection can vary significantly depending on the physical placement of your router. For
example, the thickness and number of walls the wireless signal must pass through may limit the
range. For best results, place your router:
• Near the center of the area where your computers and other devices will operate, preferably
within line of sight to your wireless devices.
• Accessible to an AC power outlet and near Ethernet cables for wired computers.
• In an elevated location such as a high shelf, keeping the number of walls and ceilings between
the wireless ADSL2+ modem router and your other devices to a minimum.
• Away from electrical devices which are potential sources of interference, such as ceiling fans,
home security systems, microwaves, or the base for a cordless phone.
• Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large
expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and
concrete can also affect your wireless signal.
Failure to follow these guidelines can result in significant performance degradation
or an inability to wirelessly connect to the Internet.
6 Getting to Know Your Wireless Router