Using Wps To Configure The Wireless Network - NETGEAR DG834Gv3 Setup Manual

To set up your computers for wireless connectivity:
1. Program the wireless settings of each computer or wireless adapter to have the same SSID
(wireless network name) as the router.
2. Check that the wireless adapter on each computer can support the mode and security option
that you selected. (If you have a question, see the online User Manual or review the settings
you selected in "Specifying Wireless Settings" on page
3. Check that the security settings on each wireless device match the security settings of the
router. For example, if you selected a security option requiring a passphrase, then the same
passphrase must be used for each wireless computer.
4. Check that each wireless computer has a wireless link and is able to obtain an IP address by
DHCP from the router.
For a Windows PC, go to the Control Panel and select Network Connections.
Check the Wireless Connections Properties and ensure that TCP/IP Properties
are set to Obtain an IP address automatically.
To access the Internet from any computer connected to your wireless ADSL2+ modem router,
launch a browser such as Microsoft Internet Explorer or Netscape Navigator. You should see the
wireless ADSL2+ modem router's Internet LED blink, indicating communication to the ISP.

Using WPS to Configure the Wireless Network

These instructions assume that you are configuring WPS in the router for the first time. If you
specify your wireless settings then you do not need to use WPS.
To set up basic wireless connectivity:
Log in to the wireless ADSL2+ modem router at its default LAN address of http://192.168.0.1
1.
with its default user name of admin and default password of password, or using whatever
LAN address and password you have set up.
You can also enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
2. On the router main menu, select Add a WPS Client (computers that will connect wirelessly to
the router are clients).
Configuring Your Wireless Network
20).
21