Hardware Specifications - Watchguard AP102 Hardware Manual

Hardware Specifications

The WatchGuard® AP family of wireless access points provide secure, reliable, wireless communications while
delivering high performance and broad coverage—a perfect combination of services to meet the needs of
enterprise-level customers, small businesses, branch offices, campuses, and hotels alike.
WatchGuard AP102 devices feature 2x2 MIMO (Multiple Input Multiple Output) capability and 802.11 a/b/g/n
wireless coverage and operate on either the 2.4GHz (b/g/n) or 5GHz (a/n) spectrum, to provide enhanced
reliability and performance. Internal antennas, a water-resistant case, minimalist labeling, and small LEDs
make this device ideal for low profile deployment in an indoor or outdoor environment. Power is provided via
an optional PoE injector or optional AC adapter.
The WatchGuard AP device is managed and controlled directly from a WatchGuard Firebox or XTM device to
provide centralized, secure management and configuration of all WatchGuard wireless devices on your
network.
This Hardware Guide applies to the WatchGuard AP102. If your WatchGuard AP device has a different
model number, your hardware is described in the WatchGuard AP Hardware Guide for that model.
Requirements
The WatchGuard AP102 device must be managed by a WatchGuard Firebox or XTM device that uses Fireware
XTM OS v11.8.3 or higher.
See the AP102 Quick Start Guide or the WatchGuard System Manager help for information about how to use
your XTM device to manage your WatchGuard AP device.
Hardware Guide 1