Environmental Requirements - Watchguard AP102 Hardware Manual

Environmental Requirements

To safely install your WatchGuard AP device, we recommend that you:

Install the device indoors or outdoors, preferably under cover.

Make sure the device has adequate clearance for air flow and cooling.

Connect the device to a surge-protected power source to prevent damage from sudden power
changes.
Other environmental requirements:
Operating temperature
Operating relative humidity
Non-operating temperature
Non-operating relative humidity
IP Rating
Hardware Guide
-4 to 131°F (-20 to 55°C)
5% to 90% Non-condensing
-40 to 158°F (-40 to 70°C)
5% to 90% Non-condensing
IP66 — Device is certified to be dust tight and protected
against jets of water
Hardware Specifications
3