About Your Hardware; Hardware Specifications - Watchguard AP420 Hardware Manual

WatchGuard AP420 Hardware Guide

About Your Hardware

Hardware Specifications

Chipset
Processor and RAM
Radio Type and
Frequency Band
Antenna
Ethernet Interface
USB Port
Power Interface
Power Consumption
2
Qualcomm QCA9994
Qualcomm IPQ8064 1.4GHz dual core ARM processor with 256 MB
RAM and 128 MB Flash
2.4 GHz, 802.11b/g/n. Max data rate: 800 Mbps
5 GHz, 802.11a/n/ac. Max data rate: 1.733 Gbps
Third radio for dedicated RF and security scanning in Wi-Fi Cloud mode
10 integrated omnidirectional antennas
4 antennas: 2.4 GHz radio
n
4 antennas: 5 GHz radio
n
2 antennas: Third scanning radio
n
1 x 10/100/1000 Mbps Gigabit Ethernet (LAN1) 802.3at PoE+ / 802.3af
PoE, PoE input voltage: 48V
1 x 10/100/1000 Mbps Gigabit Ethernet (LAN2) for a wired extension of
an SSID or link aggregation.
1 x RJ45 serial console
RS232 Serial
Bits per second: 115200
Data Bits: 8, Stop Bits: 1
Parity: None, Flow Control: None
1 USB 2.0 port (not in use)
Power over Ethernet: 802.3at (PoE+) / 802.3af (PoE)
DC jack (6.3 mm connector): 12V DC input, 2.0A
Max: PoE+ (802.3at): 21.5W
Max: PoE (802.3af): 12.95W
Max: DC power: 17.9W
Min: 8.1W
Average: 16W
WatchGuard Technologies, Inc.