Watchguard Ap325 Hardware Guide; Requirements; About Your Hardware; Hardware Specifications - Watchguard AP325 Hardware Manual

WatchGuard AP325 Hardware Guide

WatchGuard AP325 devices are intended for low to medium density environments and feature 2x2 MU-
MIMO with dual concurrent 5 GHz and 2.4 GHz radios supporting 802.11a/n/ac Wave 2, 802.11b/g/n, two
spatial streams, and data rates of up to 876 Mbps and 300 Mbps, respectively. The AP325 also contains a
third 2x2 MIMO 802.11ac radio for dedicated multi-function security and wireless network scanning (Wi-Fi
Cloud mode only).

Requirements

There are two ways you can manage your AP325:
Total Wi-Fi and Secure Wi-Fi with WatchGuard Wi-Fi Cloud
A powerful cloud-based enterprise wireless management solution for AP configuration, security, and
monitoring.
Basic Wi-Fi with WatchGuard Firebox Gateway Wireless Controller
Local management, configuration, security, and monitoring of APs directly from your WatchGuard
Firebox. The WatchGuard Firebox requires Fireware v12.1 and higher.
The third radio is not available when you manage the AP325 locally with a Gateway
Wireless Controller.

About Your Hardware

Hardware Specifications

This table shows the hardware specifications for the AP325.
Processor and RAM
Radio Type and
Frequency Band
Antenna
WatchGuard Technologies, Inc.
Qualcomm IPQ4028 717 MHz quad-core ARM processor with 256 MB RAM
and 64 MB Flash
2.4GHz, 802.11b/g/n. Max data rate: 300 Mbps
5GHz, 802.11a/n/ac. Max data rate: 876 Mbps
Third radio for dedicated RF and security scanning in Wi-Fi Cloud mode
only.
6 integrated omnidirectional antennas
2 antennas: 2.4 GHz radio
n
2 antennas: 5 GHz radio
n
WatchGuard AP325 Hardware Guide
1