Access Point Management; About Your Hardware; Hardware Specifications - Watchguard AP430CR Hardware Manual

Access Point Management

You can manage WatchGuard Wi-Fi 6 access points with WatchGuard Cloud. WatchGuard Cloud delivers a
simplified platform for Wi-Fi management to easily deploy, configure, and report on your wireless networks.
For quick start instructions on how to set up your access point with WatchGuard Cloud, go to:
watchguard.com/start

About Your Hardware

Hardware Specifications
Hardware
Processor
Memory
Radio Model
Radio Type and
Frequency Band
Antennas
Wireless Security
Ethernet Interfaces
Power Interface
Power Consumption
Description
Qualcomm Hawkeye IPQ8071A-1 Quad-core A53s @1.0GHz, Enterprise chip with
I-Temp support
Flash: NOR Flash 8MB, NAND Flash 256MB
RAM: DDR4 512MB x 2
2.4 GHz Qualcomm Iron QCN5124-1 2x2 i-temp radio
5 GHz Qualcomm Iron QCN5154-1 4x4 i-temp radio
Scan radio: Qualcomm QCA9892 i-temp dual band 11ac 2x2 radio
Bluetooth: Qualcomm CSR8811A12 Bluetooth 4.0
Radio 1: 2.4 GHz 2x2 802.11b/g/n/ax
Radio 2: 5 GHz 4x4 802.11a/n/ac/ax
Radio 3 (Scan): Dual band 802.11ac 2x2 radio
Wi-Fi: 4 x 4/5dBi 2.4/5 GHz dual band N-type omnidirectional antennas
Scan Radio: 2 x 4/5dBi 2.4/5 GHz dual band N-type omnidirectional
antennas
BLE: 1 x 4dBi 2.4 GHz external antenna
WatchGuard dual band omnidirectional dipole antennas (WG9004) are sold
separately in packs of two antennas.
Note: The device must have antennas connected for full range and functionality.
WPA3 PSK, WPA2 PSK, WPA3/WPA2 PSK, WPA3 Enterprise, WPA2 Enterprise,
OWA
1 x 5 GbE Ethernet port (Aquantia AQR114C)
1 x GbE Ethernet port (QCA AR8033). This LAN 2 port is discontinued in
hardware revision M and higher.
PoE 54V DC 802.3at
25.44W