RM-701
BB Troubleshooting and Manual Tuning Guide
Steps
1. Place the phone in the flash adapter or connect data cable to phone.
Phoenix service software.
2. Start
3. Choose File → Scan Product.
4. From the Mode drop-down menu, set mode to Local.
5. Choose Testing → Self Tests.
Self Tests window check the following Bluetooth and FM radio related tests:
6. In the
• ST_BT_IF_TEST
• ST_BT_AUDIO_IF_TEST
• ST_BT_WAKEUP_TEST
7. To run the tests, click Start.
WLAN self test in Phoenix
Prerequisites
A flash adapter (or phone data cable) connected to a PC with Phoenix service software is required.
Steps
1. Place the phone in the flash adapter or connect data cable to phone.
Phoenix service software.
2. Start
3. Choose File → Scan Product.
4. From the Mode drop-down menu, set mode to Local.
5. Choose Testing → Self Tests.
Issue 1
Figure 17 Bluetooth and FM radio self tests in
COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
Phoenix
Page 3 – 51