Self Tests window check the following WLAN test:
6. In the
• ST_WLAN_TEST
7. To run the test, click Start.
Bluetooth BER test in Phoenix
Prerequisites
JBT-9, or SB-6 Bluetooth test box (BT-box) is required to perform a BER test. If a BT-box is not available,
Bluetooth functionality can be checked by transferring a file to another Bluetooth phone.
Steps
1. Connect data cable to phone.
Phoenix service software.
2. Start
3. Choose File → Scan Product.
4. Choose Testing → Bluetooth LOCALS .
5. Locate the BT-box serial number (12 digits) found in the type label on the back of the JBT-9, or SB-6
Bluetooth test box.
LOCALS window, write the 12-digit serial number on the Counterpart BT Device
6. In the Bluetooth
Address line.
Page 3 – 52
COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
BB Troubleshooting and Manual Tuning Guide
RM-701
Issue 1