Extron electronics IPL EXP PDU4H Setup Manual page 10

IPL EXP PDU4H • Setup Guide (Continued)
Overall Configuration Procedure for the Control Processor and Expansion
Interfaces
Within Global Configurator
(GC Professional or
GC Plus mode):
Figure 2. Overall Configuration Steps
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
10
Configure the IP settings
of the control processor,
expansion interface,
NBP network button panels, and
TouchLink Pro touchpanels.
If desired or required, use
Toolbelt or other software to con gure
security settings for 802.1X, SSL.
Upload security certi cates, private keys.
Create a new GC Professional or GC Plus project
and add the control processor to it.
Is
a GUI layout
No
required?
Con gure ports on the
control processor.
Create monitors, schedules, timers,
macros, and local variables.
Add IPL EXP expansion interfaces, touchpanels, other
interfaces, or button panels (if used) to the project.
Import GUI layouts and con gure the
touchpanels or other interfaces.
Save the project.
Build and upload the con guration to
the control processor.
Test the system, make adjustments,
nalize con guration.
on the Extron website.
© 2021 - Extron All rights reserved.
All trademarks mentioned are the property of their respective owners.
See Network Network
Communication Setup Communication Setup
on page 4.
Yes
Use GUI Designer to create
and save GUI layout designs
as needed.
Or...
Download existing
GUI layouts from identical
touchpanels.
www.extron.com
68-3495-50
Rev. A
12 21