Commissioning
4.7 Quick commissioning with a PC
Summary of settings - Select
Continue
Status Screen displayed
4.7
Quick commissioning with a PC
The screen forms that are shown in this manual show generally valid examples. The number
of setting options available in screen forms depends on the particular inverter type.
Commissioning with a PC
The following interfaces - which are control unit dependent - are available:
Table 4- 3
Type
PC connected to CU using
Interface
Restrictions
In the following the commissioning via USB is described.
84
Save Settings
On first ON command - Motor
ID is performed
Connection possibilities for a PC
USB cable
Mini-USB
USB
PROFIBUS
PROFIBUS interface
M12 - 5 pole con-
nector
-
up to 125 slaves
Distributed converter for SIMOGEAR geared motors
Getting Started, 04/2018, FW V4.7 SP10, A5E36100338B AG
Settings saved
PROFINET
PROFINET interface
M12 - 4 pole con-
nector
None