Table of Contents
Advertisement
Figure 2-9 Attaching the mounting bracket to the ceiling
5.
Feed cables through the cable holder, connect the cables to the AP, and then attach the cable
cover to the AP.
6.
Position the three screws on the AP into the keyhole slots in the mounting bracket, as shown in
Figure
2-10.
Figure 2-10 Attaching the AP to the mounting bracket
7.
Slide the AP in the opposite direction of the UP arrow until it clicks into place, as shown in
Figure
2-11.
Figure 2-11 Securing the AP to the mounting bracket
8.
Verify that the AP is securely installed to prevent it from falling off.
2-5
Advertisement
Table of Contents
