Appendix B Ports And Leds; Ports - H3C WA6638 Manual

4

Appendix B Ports and LEDs

Ports

The AP provides the following ports:
•
One console port
•
One USB port
•
One 100/1000/2500/5000/10000M Ethernet copper port
•
One 10/100/1000M Ethernet copper port
•
One power port
The AP also has a reset button and a security slot. The security slot is 7 × 3 mm (0.28 × 0.12 in) in
size.
Figure 4-1 Ports on the AP
(1) Reset button
(4) 100/1000/2500/5000/10000M Ethernet copper port (10GE/PoE++)
(5) 10/100/1000M Ethernet copper port (GE/PSE)
Table 4-1 Port and button descriptions
Port
Reset button
Console port
USB port
100/1000/2500/5000/10000M
Ethernet copper port
(10GE/PoE++)
(2) Console port
(6) Power port
Standards and
protocols
N/A
RS/EIA-232
USB 2.0
•
EEE802.3ab
•
IEEE802.3bz
•
IEEE802.3u
•
IEEE802.3af
•
IEEE802.3at
•
IEEE802.3bt
4-1
(3) USB port
Description
•
To reset the AP, press and hold the button
for no more than 5 seconds.
•
To restore the factory default, press and
hold the button for more than 5 seconds.
Used only for device configuration and
management by technical support.
N/A
Used for connecting the AP to an uplink device
for Internet or MAN access. It supports 802.3bt
PoE++ and can receive PoE power from the
uplink device.
It is represented by interface number XGE1/0/1
in the MAP file and Ten-GigabitEthernet 1 for
configuration on the AC.