Leds - H3C WA6638 Manual

Port
10/100/1000M Ethernet
copper port (GE/PSE)
Power port (54 V)

LEDs

Table 4-2 LED descriptions
LED
Standards and
protocols
•
IEEE802.3
•
IEEE802.3u
•
IEEE802.3af
N/A
Status
Off
Steady on
Yellow Flashing at 1 Hz
Flashing at 2 Hz
Steady on
Flashing at 0.5 Hz
Green
Flashing at 1 Hz
Flashing at 2 Hz
Blue Flashing at 1 Hz
Alternating between green and blue
at 1 Hz
Description
Used for connecting a downlink device. It can
also supply PoE power to the downlink device.
It is represented by interface number GE1/0/1 in
the MAP file and GigabitEthernet 1 for
configuration on the AC.
Used for receiving +54 VDC power from the local
power source.
Description
No power is present.
The AP is initializing, or an initialization exception
has occurred.
No radio cards have been detected.
The Ethernet interfaces have been shut down and
no mesh links have been established.
The AP has started up and registered to an AC, but
is in standby state (no associated clients).
The AP is starting up, but has not registered to an
AC.
Only the 2.4G radio has associated clients.
The AP is upgrading the image.
Only the 5G radio has associated clients.
Both the 2.4G and 5G radios have associated
clients.
4-2