Advertisement
3
Install the interior following the directions below.
4
Replace the burner, logs, embers, glass, and face.
Page 2 of 2
Interior, Shell - Almond
98500670
(a) Tilt the interior
forward and at a
slight angle as you
insert it into the
firebox.
Place the bottom
right corner into
the firebox first.
Note how it fits
behind the pilot
assembly.
(b) Rotate the
interior behind the
pilot assembly –
you may need to
tilt the interior
slightly so it fits
into the firebox.
(c) While
positioning the
interior, you may
wish to push it
upwards.
(d) Once in
position pull the
interior forward so
it is against the
front flanges of the
firebox. Center
the liner from side
to side.
Printed 1/13/04
© Travis Industries, Inc.
Advertisement
