Permanently Disable Alarm / Discharge Battery - Kidde P4010ACS-WCA User Manual

Hardwire photoelectric smoke alarm with voice and wireless interconnect
Table of Contents

Advertisement

14. Permanently Disable Alarm / Discharge Battery

WarninG: FaiLUre to diScHarGe aLarM battery aS inStrUcted prior to
diSpoSaL May create potentiaL For LitHiUM battery reLated Fire or Hazard.
WarninG: diScHarGinG tHe aLarM battery iS perManent
Once the alarm battery has been discharged, it cannot be reactivated!
Once discharged, the alarm will NO LONGER DETECT SMOKE.
Once the alarm battery is discharged, the battery is depleted and the alarm will no longer
function.
Once the alarm battery has been discharged, the alarm cannot be mounted onto the mounting plate
or reactivated.
Figures 14-A (top) and 14-B (bottom)
to perManentLy diSabLe aLarM / diScHarGe battery:
Rotate the alarm counterclockwise to remove it from the mounting
plate.
Disconnect AC wiring harness.
Push in the dashed area with a screwdriver to break tab (Figure 14-A).
After the tab is broken, use the screwdriver to turn the red slotted
arrow to the "PERMANENTLY DISABLE ALARM and DISCHARGE
BATTERY" location. This will disable the alarm, stop the low battery
or end of unit life "chirps" and render the alarm safe for disposal by
draining the battery (Figure 14-B).
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

P4010lacs-wca

Table of Contents