Monitor: System; Chapter 7 Monitor: System; Overview; What You Can Do In This Chapter - ZyXEL Communications GS1900 Series User Manual

7.1 Overview

This section provides information for System in Monitor. Use the System screens to view general Switch
settings.

7.1.1 What You Can Do in this Chapter

• The IP screen
• The Information screen

7.2 IP Settings

The Switch needs an IP address for it to be managed over the network. The factory default IP address is
192.168.1.1. The subnet mask specifies the network number portion of an IP address. The factory default
subnet mask is 255.255.255.0.

7.2.1 IPv4 Settings

Use this screen to view the Switch's IPv4 information. Click Monitor > System > IP > IPv4 to open this
screen.
Figure 80 Monitor > System > IP > IPv4
The following table describes the labels in this screen.
Table 23 Monitor > System > IP > IPv4
LABEL
DHCP State
IP Address
(Section 7.2 on page 72) displays IPv4 and IPv6.
(Section 7.3 on page
DESCRIPTION
This field displays the state of Dynamic Host Configuration Protocol RFC 2131 and RFC 2132
(DHCP).
This field displays IP address of the Switch in the IP domain.
GS1900 Series User's Guide
C

Monitor: System

73) displays the system information.
72
H A P T E R
7