Table 92 Configuration > Link Aggregation > LAG Management (continued)
LABEL
Type
Link Status
Active Member
Standby
Member
Action
Edit
Delete
Add
22.2.3 LAG Add
Use this screen to add a LAG. Click Configuration > Link Aggregation > LAG Management > Add to open
this screen.
Figure 160 Configuration > Link Aggregation > LAG Management > Add
The following table describes the labels in this screen.
Table 93 Configuration > Link Aggregation > LAG Management > Add
LABEL
LAG Management
LAG
Name
Type
Member Ports
Chapter 22 Configuration: Link Aggregation
DESCRIPTION
This field displays how these ports were added to the trunk group. It displays:
Static – if the ports are configured as static members of a trunk group.
LACP – if the ports are configured to join a trunk group through LACP.
Displays link status as either Link up or Link down.
Displays if this member is an active member of a trunk.
Displays if this member is an standby member of a trunk.
Click Edit to make changes to the entry.
Click Delete to remove the entry.
Click Add to create a new LAG Management entry.
DESCRIPTION
Select the link aggregation group (LAG).
Enter the name of this entry.
Select Static or LACP.
Select the member ports to be part of the LAG.
GS1900 Series User's Guide
153