Eee Edit - ZyXEL Communications GS1900 Series User Manual

Figure 130 Configuration > Port > EEE > EEE
The following table describes the labels in this screen.
Table 64 Configuration > Port > EEE > EEE
LABEL
EEE
Port
State
Edit
Cancel

19.3.2 EEE Edit

Use this screen to configure Switch port EEE settings. Click Configuration > Port > EEE > EEE > Edit to open
this screen.
Figure 131 Configuration > Port > EEE > EEE > Edit
The following table describes the labels in this screen.
Table 65 Configuration > Port > EEE > EEE > Edit
LABEL
EEE
Port List
State
Chapter 19 Configuration: Port
DESCRIPTION
Displays the port index number.
Displays the port status as enabled or disabled.
Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Click Cancel to discard the changes.
DESCRIPTION
Displays the list of port index numbers that are being configured.
Select Enable to designate the ports as EEE or Disable to not designate them as EEE.
GS1900 Series User's Guide
126