Navigation Panel - ZyXEL Communications GS1900 Series User Manual

The icons provide the following functions.
Table 8 Title Bar: Web Configurator Icons
LABEL
Refresh
Save
Status
Logout
Help
Click Logout in a screen to exit the Web Configurator. You have to log in with your password again after
you log out. This is recommended after you finish a management session for security reasons.

5.3.2 Navigation Panel

Use the menu items on the navigation panel to open screens to configure Switch features. The following
sections introduce the Switch's navigation panel menus and their screens.
Figure 68 Navigation Panel
Getting Started
Getting Started displays general device information, system status, system resource usage, and
interface status.
For details on Getting Started features, see
Chapter 5 Web Configurator
DESCRIPTION
Click Refresh to reload the page.
Click this to apply your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click this to display basic information about the Switch.
Click this to log out of the Web Configurator.
Click this to open the help page for the current screen.
GS1900 Series User's Guide
Chapter 6 on page 59.
51