Table of Contents
Advertisement
4.2 System
Use the System menu items to display and configure basic administrative details of the Industrial Managed Switch. Under
System the following topics are provided to configure and view the system information.
■ System Information
■ IP Configuration
■ IP Status
■ Users Configuration
■ Privilege Levels
■ NTP Configuration
■ Time
■ UPnP
■ DHCP Relay
■ DHCP Relay Statistics
■ CPU Load
■ System Log
■ Detailed Log
■ Remote Syslog
■ SMTP Configuration
■ Digital Input/Output
■ Fault Alarm
■ Web Firmware Upgrade
■ TFTP Firmware Upgrade
■ Save Startup Config
■ Configuration Download
■ Configuration Upload
■ Configuration Activate
■ Configuration Delete
■ Image Select
■ Factory Default
■ System Reboot
The Managed Switch system information is provided here.
Configures the Managed Switch with IPv4/IPv6 interface and IP routes on
this page.
This page displays the status of the IP protocol layer. The status is defined
by the IP interfaces, the IP routes and the neighbor cache (ARP cache)
status.
This page provides an overview of the current users. Currently the only way
to login as another user on the web server is to close and reopen the
browser.
This page provides an overview of the privilege levels.
Configure NTP server on this page.
Configure time parameter on this page.
Configure UPnP on this page.
Configure DHCP Relay on this page.
This page provides statistics for DHCP relay.
This page displays the CPU load, using an SVG graph.
The Managed Switch system log information is provided here.
The Managed Switch system detailed log information is provided here.
Configure remote syslog on this page.
Configuration SMTP parameters on this page.
Configuration digital input and output on this page.
Configuration fault alarm on this page.
This page facilitates an update of the firmware controlling the Managed
Switch.
Upgrade the firmware via TFTP server
This copies running-config to startup-config, thereby ensuring that the
currently active configuration will be used at the next reboot.
You can download the files on the switch.
You can upload the files to the switch.
You can activate the configuration file present on the switch.
You can delete the writable files which are stored in flash.
Configuration active or alternate firmware on this page.
You can reset the configuration of the Managed Switch on this page. Only
the IP configuration is retained.
You can restart the Managed Switch on this page. After restarting, the
Managed Switch will boot normally.
74
User's Manual
Advertisement
Table of Contents
