Table of Contents
Advertisement
4.20.1 MEP Configuration
The Maintenance Entity Point instances are configured here; screen in
The page includes the following fields:
Object
• Delete
• Instance
• Domain
• Mode
• Direction
• Residence Port
• Level
• Flow Instance
• Tagged VID
• This MAC
• Alarm
Figure 4-20-1: MEP configuration page screenshot
Description
This box is used to mark a MEP for deletion in next Save operation.
The ID of the MEP. Click on the ID of a MEP to enter the configuration page.
Port: This is a MEP in the Port Domain. 'Flow Instance' is a Port.
Esp: Future use
Evc: This is a MEP in the EVC Domain. 'Flow Instance' is a EVC
Mpls: Future use
MEP: This is a Maintenance Entity End Point.
MIP: This is a Maintenance Entity Intermediate Point.
Ingress: This is a Ingress (down) MEP - monitoring ingress traffic on 'Residence
Port'.
Egress: This is a Egress (up) MEP - monitoring egress traffic on 'Residence
Port'.
The port where MEP is monitoring - see 'Direction'.
The MEG level of this MEP.
The MEP is related to this flow - See 'Domain'.
Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this
VID.
Entering '0' means no TAG added.
The MAC of this MEP - can be used by other MEP when unicast is selected (Info
only).
There is an active alarm on the MEP.
374
Figure 4-20-1
appears.
User's Manual
Advertisement
Table of Contents
