Table of Contents
Advertisement
Egress Tagging
•
Allowed VLANs
•
Forbidden VLANs
The port must be a member of the same VLAN as the Port VLAN ID.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Only untagged frames are accepted on ingress. Tagged frames are
discarded.
This option is only available for ports in Hybrid mode. Ports in Trunk and Hybrid
mode may control the tagging of frames on egress.
■
Untag Port VLAN
Frames classified to the Port VLAN are transmitted untagged. Other
frames are transmitted with the relevant tag.
■
Tag All
All frames, whether classified to the Port VLAN or not, are transmitted
with a tag.
■
Untag All
All frames, whether classified to the Port VLAN or not, are transmitted
without a tag.
Ports in Trunk and Hybrid mode may control which VLANs they are
allowed to become members of. The field's syntax is identical to the
syntax used in the Enabled VLANs field.
By default, a Trunk or Hybrid port will become member of all VLANs, and is
therefore set to 1-4095. The field may be left empty, which means that the port
will not become member of any VLANs.
A port may be configured to never be member of one or more VLANs. This is
particularly useful when dynamic VLAN protocols like MVRP and GVRP must be
prevented from dynamically adding ports to VLANs. The trick is to mark such
VLANs as forbidden on the port in question. The syntax is identical to the syntax
used in the Enabled VLANs field.
By default, the field is left blank, which means that the port may become a
member of all possible VLANs.
144
User's Manual
Advertisement
Table of Contents
