Table of Contents
Advertisement
4.6.8.2 VLAN Trunking between two 802.1Q aware switches
In most cases, they are used for "Uplink" to other switches. VLANs are separated at different switches, but they need to access
to other switches within the same VLAN group. The screen in
Setup steps
1.
Add VLAN Group
Add two VLANs – VLAN 2 and VLAN 3
For Type 1-3 in Allowed Access VLANs column, the 1-3 includes VLAN1 and 2 and 3.
2.
Assign VLAN Member and PVID to each port:
VLAN 2 : Port-1,Port-2 and Port-3
VLAN 3 : Port-4, Port-5 and Port-6
VLAN 1 : All other ports – Port-7~Port-48
Figure 4-6-12
Figure 4-6-12: VLAN Trunking Diagram
Figure 4-6-13: Add VLAN 2 and VLAN 3
154
appears.
User's Manual
Advertisement
Table of Contents
