Table of Contents
Advertisement
• IP Protocol Value
• IP TTL
• IP Fragment
• IP Option
• SIP Filter
• SIP Address
• SIP Mask
• DIP Filter
defining UDP parameters will appear. These fields are explained later in
this help file.
TCP: Select TCP to filter IPv4 TCP protocol frames. Extra fields for defining
■
TCP parameters will appear. These fields are explained later in this help
file.
When "Specific" is selected for the IP protocol value, you can enter a specific
value. The allowed range is 0 to 255. A frame that hits this ACE matches this IP
protocol value.
Specify the Time-to-Live settings for this ACE.
zero: IPv4 frames with a Time-to-Live field greater than zero must not be
■
able to match this entry.
non-zero: IPv4 frames with a Time-to-Live field greater than zero must be
■
able to match this entry.
Any: Any value is allowed ("don't-care").
■
Specify the fragment offset settings for this ACE. This involves the settings for the
More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an
IPv4 frame.
No: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
■
greater than zero must not be able to match this entry.
Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
■
greater than zero must be able to match this entry.
Any: Any value is allowed ("don't-care").
■
Specify the options flag setting for this ACE.
No: IPv4 frames where the options flag is set must not be able to match
■
this entry.
Yes: IPv4 frames where the options flag is set must be able to match this
■
entry.
Any: Any value is allowed ("don't-care").
■
Specify the source IP filter for this ACE.
Any: No source IP filter is specified. (Source IP filter is "don't-care".)
■
Host: Source IP filter is set to Host. Specify the source IP address in the
■
SIP Address field that appears.
Network: Source IP filter is set to Network. Specify the source IP address
■
and source IP mask in the SIP Address and SIP Mask fields that appear.
When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
Specify the destination IP filter for this ACE.
242
User's Manual
Advertisement
Table of Contents
