Table of Contents
Advertisement
System Menu
T
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
98
LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
y
Subnet Mask 01 to 10
Sets the subnet mask of the routing destination network.
<Parameter by entering numbers>
0.0.0.0 to 255.255.255.255
This parameter is not applicable when default routing is set.
z
This parameter is applicable when the destination network is set in the network
z
addresses of the routing table.
y
IPv6 Network Address 01 to 02
Sets the IPv6 network address.
<Parameter by entering characters in IPv4/IPv6 format>
0 to 63 characters
y
Prefix Length 01 to 02
Sets the prefix length of the routing destination IPv6 network.
<Parameter by entering numbers>
0 to 128
y
IPv6 Gateway Address 01 to 02
Sets the IP address of the IPv6 router.
<Parameter by entering characters in IPv4/IPv6 format>
0 to 63 characters
z
SNMP TRAP
Settings regarding SNMP TRAP are performed with this parameter.
The TRAP function is enabled when using the print function.
y
TRAP 1 to 5
y
Agent Computer
Sets the IP address of the agent computer to return a trap.
This setting is not required when, at the submission function, the destination is
specified with an IP address.
Default value:
0.0.0.0 (not set)
Default value: 64
Advertisement
Table of Contents
