Table of Contents
Advertisement
Be sure to remove the dust on the power plug and the socket. Do not use a
dusty plug as a current leak due to humidity on its surface may heat the plug
and result in fire.
Make sure that the Printer is well grounded. Failure to ground the Printer may
result in electrical shock, fire, and increased susceptibility to electromagnetic
interference.
Do not fix, twist, bind, modify, stretch, or bend excessively the power cord. Do
not put heavy object on it. A damaged power cord may heat and result in fire or
electrical shock.
If the power cord is cut or if the wires are exposed, ask a service representative
for replacement.
Using a damaged power cord may result in fire or electrical shock.
Caution
Do not disassemble or modify the toner cartridge.
The toner on your skin will have a negative effect.
If ink stains your skin or clothing, wash with soap and water immediately.
To prevent a toner leakage, do not drop the toner cartridge nor expose it to
strong impacts.
If toner gets into your eyes, do not rub your eyes, and wash the toner out. Visit a
doctor immediately.
As the roll paper is heavy, handle it carefully to make sure that you do not drop
it.
Dropping the roll paper on your feet may result in injury.
When installing the roll paper, use the cutter to cut the end of the paper. At this
time, be careful not to injure yourself on the cutter.
Install the Printer close to a power outlet. Make sure the outlet is easy to reach in
case the power plug needs to be disconnected in an emergency.
6
LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
Advertisement
Table of Contents
