Table of Contents
Advertisement
Replacing the Process Cartridge
Chapter
1
‹ Replacement Precautions
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
66
66
LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
The following explains the procedure for replacing the process cartridge.
Warning
Do not place a process cartridge into a flame. An accident or fire
‹
may result.
Note
Keep the process cartridge stored in its cardboard box. Unpack the package
‹
only just before using it.
When handling the process cartridge, hold the handles at each end firmly
‹
with both hands.
Handle the process cartridge carefully to prevent the photoconductor drum
‹
surface from being scratched or damaged.
Do not touch areas other than the handles of the process cartridge.
‹
Be sure to mount the process cartridge cover to protect the photoconductor
‹
drum and prevent its light deterioration.
Remove the cover only when you are
installing the process cartridge into the
Printer.
Black developing toner may be adhered
‹
to the photoconductor drum of a new
process cartridge. However, this is for
maintaining the cartridge in a good
condition, so use the cartridge as is. The toner is cleaned automatically
after the cartridge is inserted into the Printer. So it does not affect the print
quality.
To prevent the waste toner from being spilled, be careful not to expose the
‹
process cartridge to strong shaking, tilting, or impacts.
Handles
Photoconductor
drum
Advertisement
Table of Contents
