Table of Contents
Advertisement
Safety Information
This installation manual explains how to install a wired remote controller connected to a Hydro Unit. Please read this manual
thoroughly before installing the remote controller.
(Please refer to the corresponding installation manual for product and other optional installation.)
WARNING
CAUTION
WARNING
Contact a service center for installation.
f Failure to do so may result in product malfunction, water leak, electric shock and fire.
Install the product with rated power supply.
f Failure to do so may result in fire or damage to a wired remote controller.
Do not modify or repair the wired remote controller yourself.
f Failure to do so may result in product malfunction, electric shock, and fire. When you need to repair the product, you
should contact a service center.
All the electric work should be performed in accordance with local regulation and installation manual by a certified
technician.
f Failure to do so may result in product malfunction, electric shock and fire due to defect.
Install the product on a hard and even surface that can support its weight.
f If the surface cannot support its weight, the wired remote controller may fall down and it may cause product damage.
Do not move or reinstall the connected wired remote controller yourself.
f Failure to do so may result in electric shock and fire.
Check whether the installation work is correctly performed in accordance with installation manual.
f When the wired remote controller is incorrectly installed, electric shock and fire may occur.
When disposing of the wired remote controller, please contact a service center.
2
DVM Hydro Unit_MWR-WW00_IM_EN_03647A(1).indd 2
Hazards or unsafe practices that may result in severe personal injury or death.
Hazards or unsafe practices that may result in minor personal injury or property damage.
2013-01-09 오후 2:48:39
Advertisement
Table of Contents
