Standards Information - Bard Site-Rite 6 Instructions For Use Manual

34
Site~Rite * 6 Ultrasound System
Internal Battery Pack Specifi cations
Battery Chemistry:
Nominal Output Voltage:
Base Power Unit Specifi cations (All base power units except 9760035)
Input Voltage:
Input Current (Max):
Nominal Battery Output Voltage:
Base Power Unit Specifi cations (Base power unit part number 9760035)
Input Voltage:
Input Current (Max):
A/C Adapter Output Voltage:
A/C Adapter Output Current:
Run and Change Times
System Without Base Power Unit:
System With Base Power Unit:
13

Standards Information

The Site~Rite* 6 Ultrasound System is designed to comply with applicable sections of the following Interna-
tional Standards:
- UL 60601-1: 2003, Medical Electrical Equipment, Part 1: General Requirements for Safety
- CAN/CSA - C22.2 No. 601.1-M90, Medical Electrical Equipment - Part 1: General Requirements for Safety
- IEC 60601-1:1988, Medical Electrical Equipment - Part 1: General Requirements for Safety
- EN 60601-1:1990, Includes Amendments A1:1993, A11:1993, A12:1993, A2:1995 and A13:1996, Medical Electrical
Equipment - Part 1: General Requirements for Safety
- IEC 60601-1-1: 2000, Medical Electrical Equipment - Part 1-1: General Requirements for Safety - Collateral Standard:
Safety Requirements for Medical Electrical Systems
- IEC 60601-1-2: 2001, Medical Electrical Equipment - Part 1-2: General Requirements for Safety - Collateral Standard:
Electromagnetic Compatibility - Requirements and Tests
- IEC 60601-2-37: 2004, Medical Electrical Equipment - Part 2-37: Particular Requirements for the Safety of Ultrasonic
Medical Diagnostic and Monitoring Equipment
- IEC 60601-1-4: 2000, Medical Electrical Equipment - Part 1-4: General Requirements for Safety - Collateral Standard:
Programmable Electrical Medical Systems
- NEMA UD-2: 2004, Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment
- NEMA UD-3: 2004, Standard for Real-Time Display of Thermal and Mechanical Acoustic Output Indices on Diagnostic
Ultrasound Equipment
- EN 55011: 1998, Group 1, Class A - Industrial, Scientifi c, and Medical (ISM) Radio-Frequency Equipment - Radio
Disturbance Characteristics-Limits and Methods of Measurement
Output Current (Max):
Lithium Ion
Output Power (Full Charge):
10.8 VDC
15 VDC
Battery Output Current (Max):
6 Amps
Battery Chemistry:
10.8 VDC
Output Power (Full Charge):
100-240 VAC, 50/60 Hz
Nominal Battery Output Voltage:
1.7 Amps
Output Power (Full Charge):
15 VDC Battery Output Current (Max):
Battery Chemistry:
7 Amps
Run TIme:
1 Hour
Charge TIme: 2 Hours
Run TIme:
3 Hours
Charge TIme: 4 Hours
6 Amps
52 Wh
6 Amps
Lithium Ion
95 Wh
10.8 VDC
95 Wh
6 Amps
Lithium Ion