Front Panel Controls - Bard Site-Rite 6 Instructions For Use Manual

16
Site~Rite * 6 Ultrasound System
2.6
Resetting the Site~Rite
Should the scanner display ever appear blank or show an exclamation mark (!), the system may
need to be reset.
To reset the system:
1. Depress and release the power button located on the front of the Site~Rite* 6 Ultrasound
System scanner.
2. Wait approximately 60 seconds for the unit to reset itself.
3. Power the unit back on per instructions in section 2.5.
3 Site~Rite 6 Ultrasound System Information
*
3.1

Front Panel Controls

Increase Gain
(In Time Set mode,
this button increases or
toggles the selected fi eld.)
Decrease Gain
(In Time Set
mode, this button
decreases or toggles
the selected fi eld.)
* 6 Ultrasound System
Depth
(In Freeze mode, if this but-
ton is held for more than 5
seconds, the system enters
the Time Set mode. In
Time Set mode, this button
selects the next fi eld.)
Print
Sends the current image to the
printer if connected. If a USB
storage device is connected to
the system, this button will also
save the current screen image to
the storage device.
Depth Markers
Toggles between depth mark-
ers, gridlines and off. Hold
for more than 5 seconds to
toggle between the low and
high contrast image.
On/Off/Reset
Freeze Image
(In Time Set mode, this button
sets the internal clock to the
displayed values and returns
the system to Run mode.)