Table of Contents
Advertisement
7 Troubleshooting & Error Screens
Missing/
Invalid Probe
System
Malfunction
Display
White
Screen
Malfunction
Battery
Empty
Battery
Malfunction
Storage Device
Error
Printer Error
Poor Image
Quality
Cause:
Scanner does not recognize or identify a probe or probe not attached.
Solution:
Ensure that a Site-Rite* 6 Ultrasound System probe is properly connected to the
system.
Cause:
Scanner is not operating within normal parameters.
Solution:
Discontinue use immediately. Return to authorized repair facility.
Cause:
Display malfunction.
Solution:
Most display malfunctions can easily be corrected by resetting the
system. To do so, power off the device, wait 60 seconds, then
power the system back on. If the display malfunction is not resolved by
resetting the system, discontinue use and return to authorized repair facility.
Cause:
Battery empty.
Solution:
Connect system to A/C outlet for operation and battery recharge.
Cause:
Battery malfunction.
Solution:
Send system to authorized repair facility for battery replacement.
Cause:
Storage device error.
Solution:
Replace storage device.
Cause:
Printer error.
Solution:
Check paper or refer to printer instructions for use.
Cause:
Incorrect settings.
Solution:
Refer to Section 5.
Cause:
Scanner is not operating within normal parameters.
Solution:
Return to authorized repair facility.
27
Instructions For Use
Hide quick links:
Advertisement
Table of Contents
