Planning A Multipoint Route - Alpine X409 Owner's Manual

3.1.8 Planning a Multipoint Route

To build your route destination-by-destination, perform the following steps:
1. Press the navigation hardkey button to access the Navigation menu.
2. Tap .
3. There is only one line in the list of route points, the starting point of the route, which is normally
the current GPS position.
4. Tap
5. The New Route to... screen appears, where you can select the destination of the route the
same way as described in the previous sections.
6. If needed, you can add further intermediate destinations.
7. To add more route points, tap
final destination. The Add to Route... menu appears again, where you can select the new route
point the same way as you have set the destination before.
8. (optional) Tap
can also delete all the destinations.
to select the destination.
to optimize the whole route or the order of waypoints. You
42
or tap to change the