Route Planning Options; These Settings Determine How Routes Will Be Calculated - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual

8.5.3 Route Planning options

These settings determine how routes will be calculated.

Tap the following buttons:
Button
Vehicle
Road Types Used for Route
Planning
Route Calculation Method
TMC Reroute Method
Vehicle types:
• Car
•
Taxi
• Bus
• Emergency vehicles
, ,
You can set the type of vehicle you will use to navigate the route.
Based upon this setting, some of the road types can be excluded from
the route or some of the restrictions may not be taken into account in
route calculation.
To let the route fit your needs, you can also set which road types are
to be considered for or to be excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean
total prohibition. If your destination can only be accessed using some
of the excluded road types, they will be used but only as much as
necessary. In this case a warning icon will be shown on the Route
Information screen, and the part of the route not matching your
preference will be displayed in a different colour on the map.
You can choose from different route types. The routing method can be
changed temporarily while creating the route: when the destination is
selected, tap
This setting determines how Alpine Navigation Software uses the
received TMC information in route recalculation:
• Auto: When route recalculation becomes necessary based on
the received TMC events, Alpine Navigation Software
recalculates the route automatically.
• Manual: When route recalculation becomes necessary based
on the received TMC events, Alpine Navigation Software
notifies you, but you can decide whether to recalculate the
route or not.
• Off: TMC events are only taken into account when the route is
recalculated in an off-route situation.
.
Description
in the Cursor menu.
61