How To Remove / Attach Parts; Height Adjustable Upper And Middle Shelf; Height Adjustable Lower Shelf; Fixed Shelf - Hitachi R-S42NH Instruction Manual

HOW TO REMOVE / ATTACH PARTS

Note ● Before removing parts, take out all the foods on the parts.
● Do not remove parts except the ones listed here.

Height adjustable lower shelf

Slightly lift up and pull out.
Lift up the door pocket while tapping the left / right of its
bottom surface, and remove it.
(It is fixed a little tightly.)
Note
When mounting, put it in firmly all way.
If it drops, it may break and cause bruise or injury.
Pull out the case fully, lift the front side slightly and then remove it.
54
Please contact a Hitachi customer service centre for cleaning such parts after removing them.
Upper
shelf
Middle
shelf

Height adjustable upper and middle shelf

Request
Before removing the upper shelf, remove the middle shelf.
Slightly lift up the back
of the shelf and draw it.
Forks of the shelf (Right / Left)
When installing the shelf, slide it until it reaches to the interior wall, then
slightly lift up the back of the shelf and push it in.
(hitch the forks of the shelf to the parts on the back of the shelf)
Draw the shelf, and pull off the
2 pins on the lower right and
remove it.

Door pocket

Chill room

Raise the shelf,as Rotate and remove it.
shown in the drawing.

Fixed shelf

Slide case
Tap
Tap