Table of Contents
Advertisement
May 2019
2
System readiness
2.1
Confirm HART Revision capability
•
If using HART
HART capability of those systems prior to transmitter installation. Not all
systems are capable of communicating with HART Revision 7. This
transmitter can be configured for either HART Revision 5 or 7.
•
For instructions on how to change the HART revision of the transmitter,
see
Switch HART revision
2.2
Confirm correct device driver
Procedure
1. Verify the latest Device Driver (DD/DTM
to ensure proper communications.
2. Reference
3. Select desired product and download the DD.
Table 2-1: Device Revisions and Files
Identify device
Softwar
NAMUR
e release
hardwar
date
e
revision
1)
June
1.1.xx
2016
(1)
NAMUR revision is located on the hardware tag of the device. Differences in level 3 changes,
signified above by xx, represent minor product changes as defined per NE53. Compatibility
and functionality are preserved and product can be used interchangeably.
(2)
HART software revision can be read using a HART capable configuration tool. Value shown
is minimum revision that could correspond to NAMUR revisions.
(3)
Device driver file names use device and DD revision (e.g. 10_01). HART Protocol is designed
to enable legacy device driver revisions to continue to communicate with new HART devices.
To access new functionality, the new device driver must be downloaded. It is recommended
to download new device driver files to ensure full functionality.
(4)
HART Revision 5 and 7 selectable, Local Operator Interface (LOI), scaled variable,
configurable alarms, expanded engineering units. Updated electronics hardware design.
Intrinsically Safe temperature classification change.
Quick Start Guide
®
based control or asset management systems, confirm the
Emerson.com
a) Reference
Table 2-1
NAMUR
HART
software
software
(
revision
revision
(
1)
2)
1.0.xx
03
mode.
or
FieldCommGroup.org
for the correct DD.
Find device driver
files
HART
Device
universa
revision
(
3)
l revision
7
10
5
9
Quick Start Guide
™
) is loaded on your systems
for the latest DD.
Review
Review
instructio
functionali
ns
ty
00809-04
Changes to
(
00-4101
software
(4)
Reference
Manual
(4)
5
Advertisement
Table of Contents
