Quick Start Guide
Figure 6-4: LOI Menu
6.3.1
Switch HART revision mode
If the HART configuration tool is not capable of communicating with HART
Revision 7, the Rosemount
capability. The following procedures will switch the HART revision mode
from the Generic Menu:
Procedure
Manual Setup → Device Information → Identification → Message
a) To change to HART Revision 5, Enter: "HART5" in the Message field.
b) To change to HART Revision 7, Enter: "HART7" in the Message field.
18
™
2051G will load a Generic Menu with limited
May 2019
Assign PV
HART Revision
Emerson.com/Rosemount
®