Gigabyte GA-P55A-UD3P User Manual page 90

Recovery Volume Options Recovery Volume Options
Intel Rapid Recover Technology provides data protection by allowing users to easily restore data and system Intel Rapid Recover Technology provides data protection by allowing users to easily restore data and system
operation using a designated recovery drive. With the Rapid Recovery Technology, which employs RAID 1 operation using a designated recovery drive. With the Rapid Recovery Technology, which employs RAID 1
functionality, users can copy the data from the master drive to the recovery drive; if needed, the data on the functionality, users can copy the data from the master drive to the recovery drive; if needed, the data on the
recovery drive can be restored back to the master drive. recovery drive can be restored back to the master drive.
Before you begin: Before you begin:
The recovery drive must have equal or greater capacity than the master drive. The recovery drive must have equal or greater capacity than the master drive.
• •
A recovery volume can be created with two hard A recovery volume can be created with two hard
• •
co-exist in the system at the same time, that is, if you have already created a recovery volume, you are co-exist in the system at the same time, that is, if you have already created a recovery volume, you are
unable to create a RAID array. unable to create a RAID array.
By default, only the master drive can be By default, only the master drive can be
• •
Step 1: Step 1:
select select Create Create RAID
RAID Volumes : RAID Volumes :
None den None dened.
Physical Disks : Physical Disks :
Port Port Drive Drive
0 0 ST3120026AS ST3120026AS
1 1 ST3120026AS ST3120026AS
[ [
Step 2: Step 2:
After entering After entering
[ [
Appendix Appendix
RAID Volume Volume in in MAIN MENU MAIN MENU and press <Enter> (Figure 8).
Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037 Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037
Copyright(C) 2003-09 Copyright(C) 2003-09
1. 1. Create RAID Create RAID V V olume olume
2. 2. Delete RAID Delete RAID V V olume olume
ed.
Model Model
hi hi ]-Select ]-Select
the volume the volume na name, select me, select
Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037 Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037
Copyright(C) 2003-09 Copyright(C) 2003-09
Recovery: Copies data between a master and a recovery disk. Recovery: Copies data between a master and a recovery disk.
RAID10: Mirrors data and stripes the mirror. RAID10: Mirrors data and stripes the mirror.
hi hi ]-Change ]-Change [TAB]-Next [TAB]-Next
drives only drives only. A recov . A
viewed in the operating system; the recovery drive is hidden. viewed in the operating system; the recovery drive is hidden.
and press <Enter> (Figure 8).
Intel Corporation. Intel Corporation. All Rights All Rights
[ MAIN MENU ] [ MAIN MENU ]
5. Exit 5. Exit
[ DISK/VOLUME INFORMATION ] [ DISK/VOLUME INFORMATION ]
Serial Serial # # Size Size
3JT354CP 3JT354CP 111.7GB 111.7GB
3JT329JX 3JT329JX 111.7GB 111.7GB
[ESC]-Exit [ESC]-Exit
Figure 8 Figure 8
Recovery under the Recovery under the RAID RAID Level
Intel Corporation. Intel Corporation. All Rights All Rights
[ CREATE VOLUME MENU ] [ CREATE VOLUME MENU ]
Name Name : : V V olume0 olume0
RAID RAID Level Level : : Recovery Recovery
Disks : Disks : Select Disks Select Disks
Strip Strip Size Size : : N/A N/A
Capacity Capacity : : 0.0 0.0 GB GB
Sync Sync : : Continuous Continuous
Create Create V V olume olume
[ HELP ] [ HELP ]
Choose the RAID level: Choose the RAID level:
RAID0: Stripes data (performance). RAID0: Stripes data (performance).
RAID1: Mirrors data (redundancy). RAID1: Mirrors data (redundancy).
RAID5: Stripes data and parity. RAID5: Stripes data and parity.
[ESC]-Previous [ESC]-Pr evious
Figure 9 Figure 9
- 90 - - 90 -
recovery volume and a ery volume and a RAID array cannot RAID array cannot
Reserved. Reserved.
3. 3. Reset Reset Disks Disks to to Non-RAID Non-RAID
4. 4. Recovery Recovery V V olume olume Options Options
Type/Status(Vol Type/Status(V ol ID) ID)
Non-RAID Non-RAID Disk Disk
Non-RAID Non-RAID Disk Disk
[ENTER]-Select [ENTER]-Select Menu Menu
Level item and item and press <Enter> (Figure 9). press <Enter> (Figure 9).
Reserved. Reserved.
Menu Menu [ENTER]-S [ENTER]-Select elect