Table of Contents
Advertisement
In Windows mode:
In Windows mode:
Steps:
Steps:
1:
1:
Use an alternative system and
Use an alternative system and inse
2:
2:
From your optical drive folder, double click
From your optical drive folder, double click
Prompt window will open similar to that
Prompt window will open similar to that
3: Insert the blank formatted disk. Depending on the operating system to be installed, select the controller
3: Insert the blank formatted disk. Depending on the operating system to be installed, select the controller
driver by pressing the corresponding letter from the menu
driver by pressing the corresponding letter from the menu
in Figure 5,
in Figure 5,
•
•
For the Intel P55, select
For the Intel P55, select
system.
system.
For the JMicron JMB362, select
For the JMicron JMB362, select
•
•
erating system.
erating system.
For the Marvell 9128 , select
For the Marvell 9128 , select
•
•
system (Windows XP only).
system (Windows XP only).
Your system will then automatically copy the driver les to the oppy disk. Press any key to exit when nished.
Your system will then automatically copy the driver les to the oppy disk. Press any key to exit when nished.
insert the motherboard driver disk.
rt the motherboard driver disk.
the
the
in Figure 5.
in Figure 5.
7) Intel Rapid Storage driver for 32bit
7) Intel Rapid Storage driver for 32bit system
3) GIGABYTE GSATA driver for 32bit
3) GIGABYTE GSATA driver for 32bit system
5) Marvell AHCI driver for 32bit
5) Marvell AHCI driver for 32bit system
Figure 4
Figure 4
Menu.exe le in the
Menu.exe
le in the
BootDrv
BootDrv folder (Figure
and press <Enter>. For example, from the
and press <Enter>. For example, from the
system for Windows 32-bit operating
system for Windows 32-bit operating
-
-
1
1
0
0
5
5
-
-
folder (Figure
4). A Command
4). A Command
for Windows 32-bit operating
system for Windows 32-bit op-
for Windows 32-bit op-
for Windows 32-bit operating
Figure 5
Figure 5
A
A
p
p
p
p
menu
menu
e
e
n
n
d
d
i
i
x
x
Advertisement
Table of Contents
