Gigabyte GA-P55A-UD3P User Manual page 112

C. Rebuilding an Array C. Rebuilding an Array
Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies
only to fault-tolerant arrays such as RAID 1, RAID 5 or RAID 10 only to fault-tolerant arrays such as RAID 1, RAID 5 or RAID 10
drive is added to replace a failed drive to rebuild a RAID 1 array. (Note: The new drive must have equal or drive is added to replace a failed drive to rebuild a RAID 1 array. (Note: The new drive must have equal or
greater capacity than the old greater capacity than the old
For the Intel P55: For the Intel P55:
Turn off your computer and replace the failed hard drive with a new one. Restart your computer. Turn off your computer and replace the failed hard drive with a new one. Restart your computer.
• •
Enabling Enabling
Step 1: Step 1:
When the message "Press <Ctrl-I> to enter Conguration Utility" appears, press <Ctrl> + <I> to enter the When the message "Press <Ctrl-I> to enter Conguration Utility" appears, press <Ctrl> + <I> to enter the
RAID Conguration Utility. The following screen appears after you enter the RAID Conguration Utility. RAID Conguration Utility. The following screen appears after you enter the RAID Conguration Utility.
"Degraded volume and disk available for rebuilding detected. Selecting "Degraded volume and disk available for rebuilding detected. Selecting
a disk initiates a rebuild. Rebuild completes in the operating system. a disk initiates a rebuild. Rebuild completes in the operating system.
Select the port of the Select the port of the
RAID Volumes : RAID Volumes :
None None den dened.
Physical Disks : Physical Disks :
Port Port Drive Drive
0 0 ST3120026AS ST3120026AS
1 1 WDC WDC
[ [
Step 2: Step 2:
Select the new hard drive to Select the new hard drive to
indicating that an automatic rebuild will be performed after you enter the operating system (look for the indicating that an automatic rebuild will be performed after you enter the operating system (look for the
Rapid Storage Technology Rapid Storage
rebuilt). If you do not enable automatic rebuild on this stage, you have to manually rebuild the array in the rebuilt). If you do not enable automatic rebuild on this stage, you have to manually rebuild the array in the
operating system (see the next page for more details). operating system (see the next page for more details).
RAID Volumes : RAID Volumes :
ID ID Name Name
0 0 V V
Physical Disks : Physical Disks :
Port Port Drive Drive
0 0 ST3120026AS ST3120026AS
1 1 WDC WDC
[ [
Appendix Appendix
one.) one.)
Automatic Automatic Rebuild Rebuild
Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037 Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037
Copyright(C) 2003-09 Copyright(C) 2003-09
[ [
1. 1. Create RAID Create RAID V V olume olume
2. 2. Delete RAID Delete RAID V V olume olume
destination disk for rebuilding (ESC to exit): destination disk for rebuilding (ESC to exit):
Port Port Drive Drive Model Model
ed.
1 1 WDC WDC WD800JD-22LS WD800JD-22LS
[ [ hi hi ]-Previous/N ]-Previous/Next ext
Model Model
WD800JD-22LS WD800JD-22LS
hi hi ]-Select ]-Select
add into the array to add into the array to
Technology icon icon
Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037 Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037
Copyright(C) 2003-09 Copyright(C) 2003-09
1. 1. Create RAID Create RAID V V olume olume
2. 2. Delete RAID Delete RAID V V olume olume
Level Level
olume0 olume0 RAID1(Mirror) RAID1(Mirror)
Model Model
WD800JD-22LS WD800JD-22LS
Volumes with "Rebuild" status will be rebuilt within the operating system. Volumes with "Rebuild" status will be rebuilt within the operating system.
hi hi ]-Select ]-Select
arrays. The procedure arrays. The
Intel Corporation. Intel Corporation. All Rights All Rights
[ MAIN MENU ] [ MAIN MENU ]
DEGRADED VOLUME DETECTED DEGRADED VOLUME DETECTED ]
[ DISK/VOLUME INFORMATION ] [ DISK/VOLUME INFORMATION ]
Serial Serial # #
WD-WMAM9W736333 WD-WMAM9W736333
[ENTER]-Select [ENTER]-Select
Serial Serial # # Size Size
3JT354CP 3JT354CP 111.7GB 111.7GB
WD-WMAM9W736333 WD-WMAM9W736333 111.7GB 111.7GB
[ESC]-Exit [ESC]-Exit
be rebuilt and press <Enter>. The following screen appears, be rebuilt and press <Enter>. The following screen appears,
in the notication area, which will show that a RAID volume is being in the notication area, which will show that a RAID volume is being
Intel Corporation. Intel Corporation. All Rights All Rights
[ MAIN MENU ] [ MAIN MENU ]
5. Exit 5. Exit
[ DISK/VOLUME INFORMATION ] [ DISK/VOLUME INFORMATION ]
Strip Strip Size Size
N/A N/A 111.7GB 111.7GB
Serial Serial # # Size Size
3JT354CP 3JT354CP 111.7GB 111.7GB
WD-WMAM9W736333 WD-WMAM9W736333 111.7GB 111.7GB
[ESC]-Exit [ESC]-Exit
- - 1 112 - 12 -
procedures below assume a new s below assume a new
Reserved. Reserved.
]
3. 3. Reset Reset Disks Disks to to Non-RAID Non-RAID
4. Exit 4. Exit
Size Size
111.7GB 111.7GB
[ESC]-Exit [ESC]-Exit
Type/Status(Vol Type/Status(V ol ID) ID)
Member Disk (0) Member Disk (0)
Non-RAID Non-RAID Disk Disk
[ENTER]-Select [ENTER]-Select Menu Menu
Reserved. Reserved.
3. 3. Reset Reset Disks Disks to to Non-RAID Non-RAID
4. 4. Recovery Recovery V V olume olume Options Options
Status Status Bootable Bootable
Rebuild Rebuild Y Y es es
Type/Status(V Type/Status(Vol ol ID) ID)
Member Disk (0) Member Disk (0)
Member Disk (0) Member Disk (0)
[ENTER]-Select [ENTER]-Select Menu Menu
Intel Intel